Permanent indoor and outdoor LED video walls for churches, lobbies, conference rooms, venues and storefronts. We handle the site survey, wall design, mounting, power and data, video processing, calibration and staff training, across Los Angeles, Orange County, the Inland Empire, San Diego and Las Vegas.
A permanent LED wall is a building system, not just a big screen. These are the pieces we plan and install for every project.
We measure the wall, check viewing distances and sight lines, look at ambient light, and confirm where power, data and the control location will be.
We match pixel pitch, brightness and cabinet type to how close people sit and how bright the room is, so you are not paying for resolution nobody can see.
Wall-mounted, freestanding, flown or recessed. Mounting and structural work is designed for your wall and installed by our licensed C-7/C-10 partner.
Dedicated circuits, signal and network runs from the wall to the processor and control location, labeled and documented.
NovaStar processing, input switching, scaling and simple presets so a single button brings up worship lyrics, a presentation or a camera feed.
We calibrate brightness and color and train your staff or volunteers before handover.
Most of our permanent LED work falls into these applications.
| Application | Typical setup | What matters most |
|---|---|---|
| Churches and worship centers | Center main wall, often with side IMAG screens | Viewing angle for wide seating, camera-friendly refresh rate, volunteer-friendly control |
| Corporate lobbies and offices | Fine-pitch wall for branding, dashboards or art | Close viewing distance, seamless image, scheduled content |
| Conference and training rooms | Fine-pitch wall replacing a projector | Readable text up close, video-conferencing integration |
| Venues, gyms and arenas | Large wall or scoreboard-style display | Brightness, durability, sight lines from every seat |
| Retail and restaurants | Storefront or menu-board LED | Daylight brightness, remote content updates |
| Outdoor signs | Weather-rated outdoor LED cabinets | IP rating, brightness, structure and permits |
These are the starting points we use. Final selection depends on content (text-heavy slides need finer pitch than video) and budget.
| Pixel pitch | Closest comfortable viewing | Common uses |
|---|---|---|
| 0.9–1.2 mm | about 3–4 ft | Boardrooms, control rooms, close-up lobby walls |
| 1.5–1.9 mm | about 5–7 ft | Conference rooms, lobbies, small sanctuaries |
| 2.5–2.9 mm | about 8–10 ft | Sanctuaries, auditoriums, ballrooms |
| 3.9 mm and up | about 13 ft and farther | Large rooms, gyms, arenas, outdoor signs |
Want to try sizes first? Use the LED wall calculator or the LED wall selector.
We supply our own Unity LED panel series (fine-pitch indoor, outdoor and creative) built with LEDs from Nationstar, Kinglight and Sinyopto, driven by NovaStar receiving cards and processors. Two screens with the same pixel pitch can look and last very differently: the LED binning, driver ICs, power supplies and cabinet quality decide uniformity, refresh rate on camera and long-term reliability. Ask us to walk you through the components in any quote you are comparing.
Other LED installs include the main video wall and IMAG screens at BAPS Shri Swaminarayan Mandir in Chino Hills and the LED wall at Humanity Church in Pomona. See all projects.
We visit, measure and talk through what the wall needs to show, who will run it and your budget.
You get a wall layout, pitch recommendation, structure and power plan and an itemized price.
Panels are built and tested, then mounted, wired and connected to processing and control.
We calibrate brightness and color and set up presets for the content you use most.
Hands-on training for staff or volunteers, with a short written guide for the booth.
Call us after handover for adjustments, content questions and service.
Service areas: Los Angeles · Orange County · Riverside · San Diego · Las Vegas
The total depends on the wall size, pixel pitch, indoor or outdoor rating, mounting structure, power and data runs, and the video processor and control system. We publish our LED screen prices on the LED screens page and explain the full cost picture in our LED wall price guide. After a site survey we send an itemized proposal so you can see the screen, structure, installation and programming costs separately.
Pitch is the distance between pixels in millimeters. The closer your nearest viewers sit, the finer the pitch you need. As a rule of thumb, a 1.5 mm wall looks smooth from about 5 feet away, 2.6 mm from about 9 feet and 3.9 mm from about 13 feet. Going finer than your room needs mostly adds cost, so we size the pitch to your actual seating or walking distance.
In rooms with windows or bright lighting, usually yes: an LED wall stays bright and high-contrast without darkening the room, needs no lamp replacements and has no shadows from people walking in front of a screen. Projection can still make sense for very large images on a tight budget. Our projector vs LED wall guide compares the two in detail.
We design the system and manage the project. Mounting, structure and power are installed by our licensed C-7/C-10 partner, and we coordinate with your facilities team, architect or general contractor when the wall is part of a larger build-out.
Most indoor walls are installed and commissioned in a few days once the wall surface and power are ready. Larger walls, outdoor signs and projects that need new structure or electrical work take longer. We give you a schedule with the proposal.
We set up the video processor and content system so your staff or volunteers can switch inputs and play content from simple presets, then train them on site. Call us after handover if anything needs adjusting.
Send us the wall size or a photo of the space, how far the nearest viewers sit and what you want to show. We reply within 1 business hour, Mon–Sat.
Start Your Inquiry
Select your project type so we can ask the right questions.
