Clear speech in every seat, full worship music and controls volunteers can run with confidence. We assess, design, install and tune church sound systems across Los Angeles, Orange County, the Inland Empire and San Diego.
Most churches call us for one of these problems. Each one has a specific cause and a specific fix.
Sermons that sound loud but unclear usually point to speaker placement, coverage and reflections, not volume. We fix intelligibility first.
Front rows too loud and back rows too quiet, or dead spots under balconies. We cover the room evenly with mains and fills.
Squeals from lapel or pulpit mics come from speaker placement and tuning. We set gain structure and DSP so pastors can move freely.
Bands need headroom, subwoofers sized to the room and a mixer with enough inputs and monitor mixes.
We set up scenes, labels and simple controls so any trained volunteer can run a service.
We plan a coherent system you can grow, often reusing good wiring and components to save budget.
| System part | What we typically use | Why it matters |
|---|---|---|
| Main loudspeakers | Line-array or point-source speakers sized to the room (we install brands such as RCF and Adamson) | Even coverage and clarity from the front row to the back |
| Fills and delays | Front, side, balcony and under-balcony fills | Covers seats the mains cannot reach without making the room louder |
| Digital mixing and DSP | Allen & Heath digital consoles and rack mixers, Symetrix DSP | Saved scenes, room tuning and protection for the system |
| Wireless microphones | Shure and Sennheiser handheld, headset and lapel systems | Reliable mics for pastors, worship leaders and readers |
| Monitoring | Stage wedges or in-ear monitors | Worship teams hear themselves, and the room gets quieter |
| Overflow, lobby and streaming feeds | Distributed audio and a separate broadcast mix | The service sounds right in every room and online |
| Assistive listening | RF, infrared or hearing loop | Helps members with hearing loss and meets accessibility rules |



At the St. Edward Family Center we installed four RCF C 32 loudspeakers, two RCF HL 35 line-array speakers and three RCF CM 06 fills, run from an Allen & Heath SQ-Rack with RCF IPS amplification, then tuned the DSP for speech clarity. More: BAPS Chino Hills gymnasium audio · Temple Solel outdoor audio · Sathya Sai Center, Riverside
We visit during or after a service, listen from different seats and note what your team struggles with.
Speaker placement, coverage and the input list are planned for your room, your band and your budget.
An itemized proposal, with an option to phase the work if you need to spread the cost.
Speakers, wiring, racks and the console are installed with minimal disruption to services. Electrical and structural work is done by our licensed C-7/C-10 partner.
We set gain, EQ, delay and limits, then walk the room to confirm coverage and clarity.
Hands-on training on your system, plus scene presets and a quick-start guide for the booth.
Church AV by area: Los Angeles · Orange County · Riverside · Ontario & Inland Empire · San Diego
Usually it is a mix of the room and the system: hard walls and high ceilings that reflect sound, speakers aimed at walls instead of seats, too few speakers trying to cover too much, or a system that was never tuned with delay and EQ. Turning things up makes it worse. A proper assessment measures coverage and reflections and fixes the cause, which may be re-aiming or replacing speakers, adding fills, DSP tuning or acoustic treatment.
It depends on the room. Line arrays control vertical coverage well in long or tall rooms and on raked seating. Point-source speakers are often the better value in smaller or wider rooms. Many installs combine a main system with fills for balconies, under-balcony seats and side sections. We choose after modeling your room, not by preference.
Yes, and we design for it. We set up the digital mixer with saved scenes for each type of service, label inputs clearly, limit what can be changed by accident and train your team on the actual system. Many churches also keep a simple mode for weekday events.
Accessibility rules generally require assistive listening systems in assembly areas that have amplified sound, and they genuinely help members with hearing loss. We can add an RF, infrared or loop system to any installation and include the required signage.
It depends on the room size, the number of zones, whether you need new speakers, mixing, wireless microphones, monitoring and streaming audio, and how much existing wiring can be reused. After an assessment we provide an itemized proposal, and we can phase the work over several budget cycles. See our phased upgrade guide.
Yes. A good install includes a separate broadcast mix so the online audience hears a balanced service instead of the room mix. We can tie the console into your live streaming system and cameras.
Tell us about your sanctuary, seating, worship style and what is not working today. We reply within 1 business hour, Mon–Sat.